Wireless N WiFi Repeater is Not Turning On?

I have a Wireless N WiFi repeater that worked well till now. But after the power outage, it stopped working. I do not have any idea on what I have to do now.

You reading this post is an indication of the fact that you have a Wireless-N WiFi repeater setup done and are also stuck with the same issue. Has your repeater stopped working all of a sudden? Well, this usually happens after a sudden power outage when the technical device stops working. But do not worry, we can help you out. Here you will find the effective solutions that will help you get your repeater up and working within a matter of minutes.

Repeater Stopped Working After Power Outage: Fixed

1. Power it Off and On

We suggest you power off your Wireless N WiFi repeater once. Take out the power cable and then wait for some time. Take at least 5 minutes and then connect the power cable and turn on the repeater. This process is known as the reboot process. The repeater should work now. In case it does not then see ahead what you should do next.

2. Plug the Repeater in Alternative Socket

Perhaps the power socket into which the repeater is plugged in is damaged due to power failure. The repeater needs a non-fluctuating power supply to work properly. We recommend you try an alternative wall socket to plug the repeater now. You also need to make sure that the power adapter is not loose. As soon as you are sure that the repeater is booted up completely, go ahead and see if it works or not.

3. Inspect the Cables

A Wireless N WiFi repeater may be connected to the host router using an Ethernet cable. This cable should be making a firm and solid connection. In case the cable is faulty or damaged then you will face issues in using the repeater. We suggest you either mend the cable or replace the cable with a new one or the one that works well. You should also check that the Ethernet cable is connected to both devices properly. It shouldn’t be loose. Once the connection is made correctly, see if the issue still troubles you.

Reset the Repeater

In case the issue is still after you and is adamant to leave you, then it is time you give your repeater a new start. That said, we suggest you reset your repeater to the default factory settings. Because of the power outage, the configuration of the repeater got disturbed and hence it is not working. Resetting is the only option you are left with. To reset your repeater, try this:

• Get near your Wireless N WiFi repeater and ensure that it is fully booted up.
• Now, find the Reset button on your repeater. You can find it inside a hole named Reset.
• Use a sharp and pointed object like a paper clip to press and hold the reset button.
• You should release the button after about 10 to 15 seconds.
• The repeater will be reset and running on the factory settings.

It is now time for you to access the 192.168.10.1 WiFi repeater setup page and get the setup process of your repeater completed.

Before you set up your repeater, here are the key points that you need to consider:

Wireless N WiFi Repeater Setup: Points to Remember

1. The repeater and the router have to be placed closer to each other before you begin the setup process. This makes it easy for the devices to communicate well.
2. Make sure that both the repeater and router are receiving a consistent power supply so that you do not face setup issues.
3. The PC that you are using to set up your Wireless N WiFi repeater should be connected to its network.

In the End

With the hope of helping you out with the issue that was troubling you, here we end our piece of writing. It is suggested to bookmark this post if you need to refer to it in the future.